Compaq 4000N - Manual (Page 20)

Chapter 2 System Overview
Compaq Deskpro 4000N and 4000S Personal Computers
First Edition - September 1997
2-2
2.2 FEATURES
This section describes the standard and distinguishing features.
2.2.1 STANDARD FEATURES
The following standard features are included on all models:
♦
Pentium microprocessor with MMX technology
♦
256-KB second-level cache
♦
16 or 32 megabytes of SDRAM, with support for ECC and SDP memory
♦
Integrated S3 Trio64V2/GX graphics controller with 2-MB frame
♦
Enhanced IDE controller supporting Ultra ATA (UDMA) modes 0-2
♦
Hard drive fault prediction
♦
PCI connector
♦
Two serial interfaces
♦
Parallel interface
♦
Two universal serial bus ports
♦
Integrated network interface controller (RJ-45/AUI ports)
♦
Compaq Space Saver keyboard w/Windows support
♦
Compaq PS/2-type mouse
♦
APM 1.2 power management support
♦
Plug ’n Play compatible (with ESCD support)
♦
Energy Star compliant
♦
76-watt, surge-tolerant power supply
The Deskpro 4000N and 4000S support the Intelligent Manageability features listed below:
Configuration
Management Asset
Management Fault
Management Security
Management
Remote ROM Flash RAM Type Data ECC RAM Fault Prediction Memory Change Alert
Remote Security DMI BIOS SMART II Hard Drive Ownership Tag
Remote Wakeup Asset Tag Monitor Fault Diag. Config. Cntrl. Hardware
Remote Shutdown Sys. Serial # UDMA Integrity Log. Setup Password
Replicated Setup Sys. Manuf./Model Proactive Backup Power-On Password
ACPI-Ready Sys. Board Rev. Level Thermal Sensor QuickLock/QuickBlank
Dual-State Power Sw. ROM rev. Diskette Boot Cntrl.
Failsafe Boot Block ROM Hard Drive Type Data Diskette Write Cntrl.
Monitor Type Data I/O Port En/Dis. Cntrl.
Compaq Insight Edition Cable Lock Provision
The Intelligent Manageability features provide support for DMI 2.0, Compaq Insight Manager,
and Management Solutions Partners.