Programmable emergency call (nam option), One touch emergency call, To mute a phone conversation – Audiovox Prestige PR-140 User Manual

Page 13: One touch dialing, To store a number into one touch memory, To place a call to a number in one touch memory

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Programmable Emergency Call

(NAM Option)

This feature permits you to place a call to two emergency
numbers (maximum of 7 digits i even if your telephone
has been locked.
The two emergency numbers must be pre-programmed in
the NAM.
Note: 911 is preset emergency number, (you may change

this number if you wish.i

Operation in Lock Mode

1. Enter the emergency call number (911);

(£) (£)

(“911” does not indicate, but the I LOCK I indicator will
light.)

2. Press (

send

), the IIN USEl indicator will light.

3. To terminate the call, press <3© (more than approx.

0.5 sec.).

(The IlNUSEI indicator will go out.)

One Touch Emergency Call

This feature permits you to place a call to an emergency
number by a single key stroke, even when the unit is in

lock mode. You can deactivate this feature to prevent

unintentional call by mistake.

1. Press key (£) for more than 2 seconds. The first

emergency number that is pre-programmed in the

NAM will be displayed, and IlN USEl indicator will light

as a call is placed. The factory pre-set number is 911.

If you wish to deactivate this feature, press the

following kw sequence.

ix1[Y][z1 @(£)(©(£) (XYZ is Security Code)

To activate this feature again, follow the same key

sequence.

When this mode is ON :

OFF :

To Mute a Phone Conversation

Press (@, then key (|^. (Mute indicator) will

appear on the readout. The transmit audio will be

muted and the receive audio will be heard from the

receiver.

2. To return to normal conversation;

Press then key (© again.

3. Mute is reset when the call is terminated.

(iNliSF) NOSVC ROAM LOCK

When this mode is ON:

Turned ON

When this mode is OFF:

Turned OFF

ONE TOUCH DIALING

This feature permits you to place a call by a single key

stroke.

To Store a Number into One Touch
Memory

1. Press

(1*1?), then enter a phone number.

2. Press @, (¿) , the One Touch Key (

Stored numbers can be reviewed by pressing @, (IE)
then the One Touch Key you want to review.

To Place a Call to a Number in One
Touch Memory

Press the One Touch Key for approx. O.Ssec.

The last 8 digits of the number will be displayed on the

readout, and the IlN USEl indicator will light as a call is

placed.