Avanti W751SC - Manual (Page 16)

îi
i:
RINSE AND SPIN
Press the FUNCTION button six times. Press the
START/HOLD button once. Washing, rinsing and spinning
follows. When the FUNCTION button is pressed during
operation, the nnse times can be changed to between 1 and
5 times in duration. six times
ex) High level
WASH AND RINSE AND SPIN
Press the FUNCTION button seven times. Press the
START/HOLD button once. Washing, rinsing and spinning
follow. When the Function button is pressed during
operation the rinse times can be changed to between 1 and
5 times in duration.
seven times
ex) High level
PROBLEMS WITH YOUR WASHER?
You can solve many common appliance problems easily, saving you the cost of a possible service call.
Try the suggestions below to see if you can solve the problem before calling the servicer.
TROUBLESHOOTING GUIDE
PROBLEM POSSIBLE CAUSE
Washer does not operate. Not plugged in.
The circuit breaker tripped or blown fuse.
Vibrations. Check to assure that the washer is level.
Washing machine won't work
Is the water tap opened?
Is the washer plugged in?
Is the power cut off?
Is there enough water?
Water is not supplied
Is the water tap opened?
is the water cut off?
Is the water supply hose or hose
connection clogged?
Is the water tap frozen?
If water is not supplied in 1 hour,a
buzzer will sound, and the remaining
time indicator will show "7E".
Water does not drain
Is the drain hose down?(No pump)
Is the drain hose frozen?
Is the drain hose clogged?
If the water does not drain in 6
minutes, a buzzer will sound,and the
remaining time indicator will show "E"
Spinning does not work
Is the laundry spread out evenly
in the washer?
Is the washer set on a sturdy
flat surface?
Power won’t cut off
This sign means power is not cut
off automatically.
Make sure lamp is lit when the
power button is on.
Water is overflowed
Restart after spinning,
if the error sign still indicates,
call Avanti products for service.