Audiovox DST 961 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
using such a plate, you shouiO start with the
nad section, USING THE WALL MOUMT
adaptor
.
1. CtiDDsa a spot near art electncal outlet
and a teiephone jao
'^r phone requires a modufar leiephona
I srtd a standard
elsciTical Gullet
(120v
The power cord is six leet long; make
sure there is an eiectricai outlet within reach
of the base. The outiel should
riot be con
trolled by a wall swilcti. It the switch Is ever
turned Dit, the phone will not ooerale.
USING THE WALL MOUNT ADAPTOR
1. Posltlan the wall mount bracket oh
the base. Lire up the tabs or the waif
mount adaptor with the holes on the
bottom of the base. Snap the wall mount
bracket tinhly In place.
2. Mount Uiv oese on the wall. Position
me base so the mounting studs will lit
— Into the holes on the bOTtom of the tjase.
_ Posillor the power cord to SKteno (town
the wall toe phone is to be mounted on.
Slide Ihe base down on the mounting
studs until It locks Into place.
3. Connect the telephone line cord. The
telephone tine cord has a shap-in ptcrg at
each end. Insert one of the plugs into
the jack on the bottom of the base. In-
serttoecthereridoflhepiuglntotoe wall
iach-
4. Plug toe AC adaptor into an electncat
outlet and the DC connector on toe back
of toe Base Unit