Audiovox DST 961 - Manual (Page 10)

BASIC OPERATION
section details how to select-different ringer
types and how to turn off the handset ringer.
CHANGING RINGER TYPES
To program, the handset must be OFF.
To select a different ringer type do the
following:.
* Press PROG
* Press the # key.
* . Press:
I for ringer type 1
2 for ringer type 2
3 for ringer type 3
4 for ringer type 4
* Press PROG or OFF to exit program mode.
TURNING OFF THE RINGER
To turr. the ringer do the following:
* Press PROG
* Press the # key.
* Press 0 '
* Press PROG or OFF to exit
CHECKING THE RINGER TYPE
To hear the present ringer type, do the
following:
* Press PROG
* Press the # key
* Press # to test the ringer
* Press PROG or OFF to exit
MEMORY (SPEED) DIALING
STORING SPEED DIAL NUMBERS.To pro­
gram a speed dial location, do the following:
* The phone should be OFF.
* °ress PROG. The PHONE LED will flash
ickly to indicate that the unit is in pro­
' gram mode.
* Enter the memory location (00..20) you
wish to store ^he number in.
’ Enter the phone number to be stored, up
to a maximum of 20 digits.
* Press MEM to store the number ctnd exit
program mode. The unit will emit a happy
tone (a short series of beeps) to confirm
successful programming and exit pro­
gram mode.
* If programming is unsuccessful, the unit
will generate an error tone.
QUICK MEMORY DIALING. The QUI.
MEM key gives you one button access to
the MEMORY DIAL number stored in
memory location 00. This may be a fre­
quently dallied friend, business, or emer­
gency number, such as 911.
There are two ways to dial using the
QUI.MEM KEY:
* Press TALK
* Press QUI.MEM.
* The phone number stored in memory
location 00 will be automatically dialed.
OR
* With the Handset OFF, press QUI.MEM.
* The phone number stored in memory
location 00 will be automatically dallied
after a 2 second delay.
STORING NUMBERS USING REDIAL
To store the last number dialed into a per­
manent memory location, do the following:
* The phone should be OFF.
* Press PROG. The PHONE LED will flash
quickly to irxiicate the unit is in program
mode.
* Enter the memory location (00..20) you
wish to store the number in.
* Press REDIAL.
* Press MEM to store the number and exit
program mode. The unit will emit a happy
tone (a series of short beeps) to confirm
successful programming.
* If programming is unsuccessful the unit
will generate an error tone.