Ssylwfâ^ingistarteàie – Audiovox DT921C User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
.-■: -rv ;
v
^‘,
î
; ; :
A ^
•y'- ' '^’
r.^
K Оо^о^iiH
: I " ■.
# SSylWfâ^INGiSTARTEàie-
- ■
.
Setting Up Your AUDIOVOX DT93tc
Choose nil erija near an electrical
outlet and a telephone wait jack.
AC Power Adaptor
Plug the AC power adaptor into an
etecthcal outlet and the DC connector
to the back of the base unit.
A
c
AUTION:
Use only CLASS S 9V DC POWER
SUPPLY included with your phone.
Handset Ringer
The handset rnger is programmed ON
as the factorv default setting. Refer to
PROGRAMMING THE RINGER on
page
21
for mono
information.
Setting the Tone/Pulse Switch
The TON E/PULSE switch is located on
the bottom of the base unit and is
factory set to TONE, If you have touch
tone service, do not change the switch
setting. It you have rotary (Pufse)
service, set the switch to PULSE.
Charge the handset battery pack
before use. The banery pack recharges
automatically whenever the handset is
in the base unit The batteries must
be charged for 16 hours before using
your phone for the first time.
Canrbâct Telephone Line Cord .
Plug one end of (he telephone cord into
a wall jack and the other end into the
back of the Base Unit
12
« K1
11
V'i/ll. M:11 AM