AEG 302D - Manual (Page 17)

ATTENTION
Failure to observe the rules for cleaning the appliance and
changing and cleaning the filters may cause a fire as a result of
grease
deposits. Therefore please observe these
recommendations.
1) Disconnect the hood from the electricity supply.
2) Remove the filter grille (fig. 3) - this will then allow inspection/
change of the bulb/s.
3) Unscrew defective bulb and replace with new one. Important:
always use 40W candle lamp (El 4) bulbs.
Before calling the Service Engineer because the hood fails to light
up, make sure the bulbs are screwed in tightly.
Dimensions
Height — 400mm
Width — 599mm
Depth —270mm
Weight
Net 9,7Kg
Connected Load 200W
Fan Motor 120 W
Lighting: 40 Watt Candle Lamp x 2
Lengt of the cable: 140 cm
Fan speed: 1
Extractor version: 143 m%
Filtre version:
87 m^/h
Special Accessories
Wall/Window Box
Venting Hose 120mm x 2.4M
Venting Hose 100mm x 2.4M
Universal Grease Filter
Carbon Filter KLF 60/80
171 mVh
132 mVh
Number
234 mVh
167 mVh
647 000 020
647 000 012
647 000 010
660 951 157
610 899 421
Changing the
bulbs
Technical Data
Performance
Data
17