Bogen CPT-1A - Manual

Iw
BOGEN
C O I V I M U N I C A T I O f S i a , I N C .
AUTO-REVERSE CASSETTE
TAPE PLAYER
AND FM-STEREO/FM/AM TUNER CPT-1A
OPERATING INS I KUCTIUNS
DESCRIPTION
The Bogen Model CPT-lA is a compact, integrated
unit consisting of a stereo/mono cassette tape player
and an FM-stereo/FM/AM tuner. It provides a reliable,
economical source of background music for a sound
system. Program continuity is assured by the auto •
matic tape reverse feature, which changes the direction
when the tape reaches the limit of its travel.
The CPT-IA operates on 120 volts AC. It incorpo -
rates a low-level, low impedance output, which will
drive the auxiliary input of a P.A. amplifier. The unit
can also drive 8-ohm loudspeakers directly with its
irncmal stereo amplifier (five watts per channel).
If desired, the CPT-IA may be mounted in a standard
19" equipment rack by means of the optional RPK-55
Rack Panel Kit,
CONTROLS AND FtlNCnONS
1. ON/OFFf/OLUME 7.
2. TONE - clockwise rotation increases TREBLE;
counterclockwise rotation increases BASS. ' 8.
3. AM/FM SELECTOR - OUT for FM-stereo/FM; IN
for AM, 9.
4. AUTO REVERSE CASSETTE - insert cassette until 10.
it engages; unit automatically goes from radio to
tape playing mode,
11.
5. FAST forward (& REWIND)/EJECT CASSETTE-
For rapid advance of tape, press slowly to Position 12.
1. For rewind, press PROG, then FF/EJ slowly to
Position 1. For removal of cassette, press in fully
to Position 2. For normal operation, FF/EJ must
be in released position
6. balance - clockwise rotation increases sound to
the right channel; counterclockwise rotation
increases sound to the left channel.
TUNING- rotate control in either direction to select
desired radio frequency.
. TAPE PROGRAM - press to reverse the direction
and play the opposite side of the cassette tape.
TAPE DIRECTION INDICATORS
FREQUENCY SCALE - illuminated scale indicates
radio frequency being received.
FM-STEREO SIGNAL INDICATOR illuminates
when FM-stereo radio signal is being received.
MO/ST SWITCH - for normal FM-stereo reception
set this switch to the OUT position, fnss the
switch IN for monaural operation, when receiving
weak signals that cause the FM-STEREO indicator
to come on and off, or to eliminate the aimoying
background noise from weak FM-stereo stations
while tuning.