Avanti H2311W User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
If using hood in air recircuiation mode, skip these steps
1. Pull up and twist the two spring loaded
clips around the carbon filter holder.
2. Remove the carbon filter and carbon
filter holder.
0)
"O
o
"O
0)
0
3
Q
1
c
o
c
3. Insert air diverter plate and screw
into place.
4. Remove the air recirculation louver plate
on top of the hood.
5. Finally, attach the cover plate to the
top of the hood.
This manual is related to the following products: