15 o, D? c, Lo c – Avanti H2311W User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
D)
C
o
3
Q
"O
c
(0
15
o
o
_g>
LU
(0
c
o
0
3
D?
c
1
c
o
lo
c
1. Remove filters.
'2..
Remove two phillips head screws and
cover from junction box to gain access
to eiectricai wiring.
3. If using a cable lock (not provided) pry
open the desired electrical knockout, either
on the top or the back. Feed the wires
through the 3/4” cable lock. Note: Some
local codes require the use of a cable lock
check your local codes for this information.
4. If using hood in air recirculation mode,
skip steps 4 and 5.
Pry open the desired 3 1/4x 10”
ducting knockout, either on the top or the
back.
Cable lock example
5. Attach the 3 1/4” X 10 starting collar
with damper to the duct opening you
exposed.
8