Cleaning & lubrication, Storage, Important – Black & Decker 9013 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

■

Cleaning & Lubrication

Use only mild soap and a damp

cloth to clean the tool. Never let any

liquid get inside the tool; never immerse
any part of the tool into a liquid.

Self lubricating bearings are used

In the tool and periodic lubrication is not
required. In the unlikely event that your

drill should ever require service, take or
send it to your local Black & Decker
Service Center or Authorized Service
Station. Service Center addresses are

listed on the owner's registration card
packed with your drill.

Storage

1. The best storage place is one that is

cool and dry - away from direct
sunlight, heating pipes and ducts,

furnaces, etc.

2. Best storage temperature is approxi

mately +50°F. Do not store where
temperatures may go below +40°F

or above +120°F. Avoid storage in
outside metal buildings where the

temperature could go above +120°F
in summer, as this could damage
the drill.

3. Long storage will not harm the drill

or charger. Under the proper
conditions (given above) they can
be stored for 5 years or more

without harm.

Important

To assure product SAFETY and

RELIABILITY, repairs, maintenance and

adjustment should be performed by
Black & Decker Service Centers or other

qualified organizations, always using
Black & Decker replacement parts.

1 0