Black & Decker 81/4" COMPUND MITER SAW 9425 - Manual (Page 10)

Accessories
The accessories fisted in this manual are available at extra cost from
your local dealer or Black & Decker Service Center.
A complete listing of service centers is included on the owner's
registration card packed with your tool.
If you need assistance in locating any accessory please contact:
Black & Decker (U.S.) Inc.
User Services Department
10 North Park Drive
P.O. Box 857
Hunt Valley. MD 21030>0857
Saw Biades
Cat. No. Diameter Arbor Size/Description
73-291 8-1/4" 5/8"' General purpose combination
73-293 8-1 /4" 5/8" Premium hollow ground planer
73-294 8-1/4" 5/8" Crosscut miter
73-390 8-1/4" 5/8" Carbide tipped carbide (20 tooth)
73-391 8-1/4" 5/8" Carbide tipped carbide (40 tooth)
Other Accessories
72-000 Safety Glasses
The accessories listed above are recommended for use with your #9425
8-1 /4 in. Compound Miter Saw. THE USE OF ANY OTHER ACCESSORY OR
ATTACHMENT MAY BE HAZARDOUS.
NOTE: A vacuum port on the blade guard is designed to accept a standard
1 -1 /2" diameter vacuum cleaner hose for dust collection.
Lubrication and
Maintenance
Permanently lubricated bearings
are used throughout your Miter Saw and
periodic lubrication is not required. In the
unlikely event that service is ever re­
quired, take your saw to your closest
Black & Decker Service Center as listed
on your Owner's Registration card. Do
not attempt to repair the saw yourself,
there are no user serviceable parts
inside.
10