Activating the timer, Press sel, Press band to select the band – Aiwa CT-X409 User Manual

Page 10: Set the time you wish the unit to turn off, Press and hoid my info for more than 2 seconds, 1 with the unit on, press my info, To cancel the timer, To check the setting, Notes

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

MY INFORMATION SWITCH

Activating the timer

BAND TAPE

Press SEL.

Radio indication fiashes.

Band indicator

_i.

I".

. , •— _______ (>

.ZJ_I .XJ

Press BAND to select the band.

Tune in the station that you wish to

preset with TUNE T or TUNE A.

Press SEL.

Timer indication flashes.

---- ---------------

D D I I '

rJ-I

I t

A ''

Set the time you wish the unit to turn

off.

Press TUNE T to set the hour.

Press TUNE

to set the minute.

Press and hoid MY iNFO for more than

2 seconds.

Your setting is stored in memory and the unit
turns off.

With the unit on, press MY iNFO.

The “MY INFO” indicator lights up and the
timer is activated.

To cancel the timer

Press MY INFO again so that the “MY INFO”
indicator disappears.

To check the setting

With the unit off, press MY INFO.

The turn-on time, followed by the radio frequency

and the turn-off time, appears in the display
window each for 1 second, then the unit turns off.

Notes

• Even if the unit is in a mode other than Radio

mode, the unit switches to Radio mode and

tunes in the preset radio program at the preset
time automatically.

• Even if you are listening to a radio program with

this function, pressing the following buttons
switches the unit to other mode:

— Pressihg BAND changes the unit to Radio

mode.

— Pressing TAPE changes the unit to Tape

Play mode.

— Pressing CD/MD IN changes the unit to CD/

MD IN mode.

If you switch modes with these buttons, the unit

does not turn off at the turn-off time of the timer.

ENGLISH