Beko BT-100 - Manual (Page 11)

Activating the auto Channei Scan
Channel scan perform searches for
active signals in an endless loop for all
8 channels, 38 CTCSS codes and all
83 DCS codes.
la. Press the MENU button 5
times
b. Press the UP or DOWN
button to begin scanning
__ channels when an active
signal is detected,
__ channelscan pauses on the
active channel.
S c. Press the MENU button
again, CTCSS flashes on the
LCD screen press the UP or
DOWN button to begin scanning the
CTCSS from 1-38.
d. Press the MENU button again, DCS
flashes on the LCD screen. Press the
UP or DOWN button to begin scanning
DCS code 1 -83.
e. Press the PTT button to confinn your
setting.
I
Auxiliary Features
Key Lock
The Key Lock feature allows user to
disable the UP, DOWN and MENU
buttons so that the PMR settings
could not be changed
accidentally.
____ a. To activate the Key Lock
feature, press and hold the
MENU button until
••O
tt
»»
appears on the LCD Screen,
b. To deactivate the key Lock
W feature, press and hold the
MENU button until •• O tt ««
disappears on the LCD
Screen. The PTT, and POWER
buttons will remain functional even if the
Key Lock feature is activated.
Microphone/Earphona/Charge Jack
The PMR is equipped with an auxiliary
microphone, earphone, and charge jack
located at the opposite side of the PTT
button.
LCD Screen Back Light
Every Arne a button is pressed (except
PTT and CALLbutton), the LCD Screen
back light will illuminate for 4 seconds.