Beko BT-100 - Manual (Page 10)

Selecting a Call - Ring tone
The PMR is equipped with 5 different
types of Call-Ring tones.
a. Press the MENU button 8
yflf times, the LCD Screen will
display the CA while is blinking.
b. Press the UP or DOWN
button to select the desired
Call-ring tone. A respective
Call- Ring tone sound will be
played when changing from one tone
to another.
c. Press the PTT button to conf rm your
setting.
I
Setting the Key Tone ON or OFF
This feature allows the PMR to emit
a confirmation tone after pressing each
button.
a. Press the MENU button 11
" times, “ON" flashes on the
LOD Screen.
b. PresstheUPorDOWN
i button (“ON” will be displayed
on the LCD screen) or
deactivate {“OFF" will be displayed on
the LCD screen) the key Tone feature,
c. Press the PTT button to confirm your
setting.
Activating the Vibrator mode
a. Press the MENU button 9
times; “I" flashes on the LCD
^ Screen.
^ b. Press the UP OR DOWN
---------- button to activate the vibrator
function. Or
Setting the Roger Beep
The Roger Beep is a tone which
is automatically transmitted whenever
the PTT button is released. This alerts
the receiving party to inform that you
have intentionally ended the
transmission, and you are now in receive
mode.
W a.Press the MENU button 10
times, “ON” flashes on the
LCD Screen.
b.PresstheUPorDOWN
e button (“ON” will be displayed
on the LCD screen) or
deactivate (“OFF” will be displayed on
the LCD screen) the key Tone feature,
c. Press the PTT button to confirm your
setting.
Setting the Duai Watch Mode
Your PMR is capable of monitoring two
channels, the current and another (dual
watch) channel. If the unit detects a
signal on either channel, it will stop and
receive the signal.
^a. Press the MENU button
12 times, "DCM” will be
mm/ displayed while “OF ” flashes
on the LCD Screen,
b. Press the UP or DOWN
button to select the Dual Watch
channel (1 -8, except the current
9
channel.
c. Press the MENU button to
----------- ¡change the CTCSS code.
d. Press the UP or DOWN button to
select the desired CTCSS code (1 -38)
e. Press the MENU button to change
the DCS code.
f. Press the PTT button to confirm your
setting.