BUSH DFTA9DVD User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

The Setup Menu System-DVD

1. General Setup Menu

In the DVD mode, Press the

button or open mode, then press
button for the DVD Main
Setup Menu to appear.

DVD Setup-language Setup
Press the Up/Down button to select

the DVD Setup Menu andenterthe

Language Setup option.

1) . LANGUAGE
Highlight the MENU option and press the Arrow buttons to choose the

language you prefer. Press to confirm. If the disc you are
playing has that language available. It will be displayed in the Language

Menu.

Notes:
If your preferred language Is not available, the discs default language

will be played.

2) . AUDIO

Highlight the AUDIO option and press the Arrow buttons to choose the

audio language you prefer. Press to confirm.

3) . SUBTITLE

Highlight the SUBTITLE option and press the Arrow buttons to

choose the subtitle language you prefer. Press to confirm.

4) . EXTERNAL SUBTITLE

Highlight the EXTERNAL SUBTITLE option and press the Arrow
buttons to choose the supported subtitle language.

DVD Setup-Audio Setup

E)2J0(B

DVD Setup-Audio Setup
Press the Arrow button to highlight the Audio Setup option on
the screen.
1) .DIGITALOUT
Highlight the Digital Out option
and press theArrow buttons to
choose the Audio Output mode you
prefer.
Press Enter to confirm. There are three

Audio Output modes:

SPDIF / RAW, SPDIF/ PCM, OFF.
Notes:

When Digital Output is NOT in use, it is recommended to turn « OFF » ,

the Digital Output setting for the purpose of minimising the circuit
interference.
2) . ANALOG OUT
Highlight the Analog Out option and press the Arrow buttons to
choose the Audio Output mode you prefer. Press to confirm.
NOTE: If you choose OFF cut off Analog Audio Output.
3) . DOWNMIX
There are two modes, one is LO/RO and the other one is LT/RT.

DVD Setup-Custom Setup
Press the arrow button to highlight

the Custom Setup option on the screen.

1). PARENTAL CTRL
If you want to set the Parental Control

setting enter the default password (6666). Now enter your own password

to set.

If the input code has been confirmed, the Level Setup Menu will

appear. Move the cursor to choose the accepted level and press
button to confirm and save.