Lock washer (c) hex nut (d), Note – Bolens 112-170-300 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Upper
Handle
Lock Washer (C)
Hex Nut (D)
t X
X
U
a
'"
Lower
,
Handle
\ > /
V\
Curved
Carriage Bolt (A)
\
B. Units with Non-Folding Handle—Secure
upper handle with two curved carriage bolts
■(A), lock washers (C) and hex nuts (D). See
figure 4.
FIGURE 4. Non-Folding Handle Only
5. Place the throttle control in position on right
side of upper handle. Secure with hex bolt (F)
— and lock nut (G). See figure 5.
NOTE
Reference to right or left hand side
of the mower is observed from the
operating position.
FIGURE 5.
N.
6.
Secure throttle control wire to upper and
----- lower handles with cable ties (E). See figure 6.
7. Check ALL nuts and bolts for correct
tightness.
NOTE
This
mulching
mower
is
shipped
with the mulcher baffie and mulcher
blade in place. If you wish to just
mow, a standard cutting blade is
available as optional equipment.
See
adjustment
section
for
pro
cedure to change blades.
FIGURE 6.