POLAR FT60 - Manual (Page 35)

Accessory Settings
Footpod Calibration*
Calibrate Foot Pod during training (on-the-fly
calibration)
Make sure the foot pod function in the Polar FT60
is on. Select
Settings > Training settings >
Speed sensor > Footpod and press OK.
To calibrate the footpod during training, choosing
either alternative:
1.
Stop running, stand still, and press and hold
LIGHT to go to Quick menu .
OR
2. Stop running, stand still, and press BACK once.
Select Calibrate footpod . Fix the displayed
distance with the actual distance you just run, and
press OK.
Calibration factor set! is displayed.
The foot pod is now calibrated and ready for
action.
Set Calibration Factor Manually
There are two options for setting the calibration
factor manually:
1. Before training: Select Settings > Training
settings > Footpod calib. factor . Set the
calibration factor and press OK . The foot pod is
now calibrated.
2. After starting heart rate measurement and
before training recording: In the time mode,
press
OK and then select Training settings >
Footpod calib. factor . Set the calibration
factor and press OK . The foot pod is now
calibrated. To start training recording press
BACK once and then select Start .
*Optional S1 foot pod required.
E N G L I S H
Settings 35