Eliminating a program start time, Setting station run times, Setting days to water – Hunter XC User Manual
Page 12: Selecting specific days of the week to water, Programming the controller, Selecting odd or even days to water
9
ENG
Selecting Specific Days of the Week to Water
1. With the cursor on a specific day
(the cursor will always start with MO),
press the button to activate a
particular day of the week to water.
Press the button to cancel watering for that day. After
pressing a button the cursor automatically advances to the
next day.
2. Repeat step 1 until all desired days have been selected.
The selected days will show a to indicate their status is
ON. The last is the last day of watering for that program.
Selecting Odd or Even Days to Water
This feature uses numbered day(s) of the month for watering
instead of specific days of the week (odd days: 1st, 3rd, 5th,
etc.; even days: 2nd, 4th, 6th, etc.).
1. With the cursor on Su press the
button once. The
icon and odd will
be displayed.
2. If odd day watering is desired, turn
the dial back to the run position.
3. If even day watering is desired, press
the button once. The icon and
eVen will be displayed. You can move
back and forth from odd to eVen by
pressing the and buttons.
NOTE: The 31st of any month and February 29th
are always “off” days if Odd watering is selected.
Eliminating a Program Start Time
With the dial set to sTarT TImes
position, push the or button until
you reach 12:00 AM (Midnight). From
here push the button once to reach
the OFF position.
Setting Station Run Times
1. Turn the dial to run TImes position.
2. The display will show the last
program selected (A, B, or C), the
station number selected, icon,
and the station will be flashing. You
can switch to another program by
pressing the button.
3. Use the or button to change the station run time on
the display. You can set the run times from 0 to 4 hours.
4. Press the
button to advance to the next station.
Setting Days To Water
1. Turn the dial to the WaTer days
position.
2. The display will show the last program
selected (A, B, or C). You can switch to another program
by pressing the button.
3. The controller will display the seven days of the week (MO,
TU, WE, TH, FR, SA, SU). Each day will have a icon or
a icon above the day. The icon would represent an
“On” water day, while a icon would represent an “Off”
watering day.
programmIng THe ConTroller
START TIMES
RUN TIMES
WATER DAYS
Even
2, 4,...30
odd day Watering
even day Watering
Su
Su
Mo
Mo Tu
Tu We
We Th
Th Fr
Fr Sa
Sa