Add or edit a network folder – NETGEAR N600 Wireless Dual Band Router WNDR3400v2 User Manual
Page 53
USB Storage
53
N600 Wireless Dual Band Router WNDR3400v2
By default, the USB storage device is available to all computers on your local area network
(LAN).
To access your USB device:
1.
Click the network device name or the share name in your computer’s network folders
list.
2.
For SMB://readyshare, click Connect.
Note:
If you logged in to the router before you connected your USB
device, you might not see your USB device in the router screens
until you log out and then log back in again.
Add or Edit a Network Folder
1.
You can access this feature by selecting Basic > ReadyShare > Edit, or Advanced >
USB Storage > Advanced Settings.
2.
Specify the changes that you want to make:
This manual is related to the following products: