NETGEAR N600 Wireless Dual Band Router WNDR3400v2 - Manual (Page 37)

genie Advanced Home
37
N600 Wireless Dual Band Router WNDR3400v2
Within two minutes, go to the client device and use its WPS software to join the
network without entering a password.
The router attempts to add the WPS-capable device. The WPS LED on the top of
the router blinks green. When the router establishes a WPS connection, the LED is solid
green, and the router WPS screen displays a confirmation message.
4. Repeat Step 2 and Step 3 to add another WPS client to your network.
Setup Menu
Select Advanced > Setup to display the Setup menu. The following selections are available:
• Internet Setup. This is a shortcut to the same Internet Setup screen that you can access
from the dashboard on the Basic Home screen. See
Internet Setup on page 23.
• Wireless Setup. This is a shortcut to the same Wireless Setup screen that you can
access from the dashboard on the Basic Home screen. See Basic Wireless Settings on
page 27.
• Guest Network. This is a shortcut to the same Guest Network screen that you can
access from the dashboard on the Basic Home screen. See Guest Networks on page 31.
• WAN Setup. Internet (WAN) setup. See WAN Setup on page 38.
• LAN Setup. Local area network (LAN) setup. See LAN Setup on page 41.
• QoS Setup. Quality of Service (QoS) setup. See Quality of Service (QoS) Setup on
page 44.