Escort 9500ix - Manual (Page 11)

Features and Specifications
Operating Bands
• X-band 10.525 GHz ±25 MHz
• K-band 24.150 GHz ±100 MHz
• Ka-band 34.700 GHz ±1300 MHz
• Laser 904nm, 33 MHz bandwidth
Radar Receiver / Detector Type
• Superheterodyne, Varactor-Tuned VCO
• Scanning Frequency Discriminator
• Digital Signal Processing (DSP)
GPS Receiver
Laser Detection
• Quantum Limited Video Receiver
• Multiple Laser Sensor Diodes
Display Type
• 280 LED Alphanumeric
• Bar Graph, SpeedAlert, ExpertMeter,
or SpecDisplay
• 5-Levels of Brightness Control, including
Full Dark Mode Power Requirement
• 12VDC, Negative Ground
• SmartCord (included)
Preferences
• Power-On Indication
• SpeedAlert
• AutoLearn
• Signal Strength Meter
• AutoMute
• AutoPower
• Units
• Voice Alerts
• Radar / Laser Bands
• Markers
Sensitivity Control
• AutoSensitivity, Highway and Auto NoX
Auto Calibration Circuitry
SmartShield VG2 Immunity
Dimensions (Inches)
• 1.40" H x 2.90" W x 5.35" L
18 19
Specifications Details of Preferences
Units
Units ENG (Speed measured in
miles per hour)
In this setting, all speed related features
are displayed in miles per hour (MPH).
(factory default)
Units MET (Speed measured in
kilometers per hour)
In this setting, all speed related features
are displayed in kilometers per hour
(KPH).
Voice Announcements
Voice ON (Voice announcements on)
In this setting, all alerts and instructions
are communicated using a voice
announcement. (factory default)
Voice OFF (Voice announcements off)
With voice off, normal tones will be used
for alerts.
Bands
Bands DFT
In this setting all radar and laser
frequencies, (with the exception of POP
mode) are monitored. This is the factory
setting, and it is recommended that you
use your PASSPORT in this mode.
Bands MOD
In this setting, PASSPORT will warn you
with an audible alert, and associated text
message stating which band has been
modified (i.e. “X OFF”). This warning is
displayed during the start up sequence.
Markers
Marks DFT
In this setting, all makers in the database
will be reported as you approach them.
This is the factory setting and it is
recommended that you use your
PASSPORT in this mode.
Marks MOD
In this setting, only the selected Markers
will be reported.
NOTE: PASSPORT has plenty of
built in memory to store thousands of
locations. In the rare case that the
database would become 80% full, a
message will appear at start up to let
you know you’re reaching its limit.
WARNING: Only modify bands if
you are absolutely certain that
there are no traffic radar units
using that specific band in your
area.