Escort 432 User Manual
Features and monitor controls, Monitor installation, Camera installation
4
3
2
Features and Monitor Controls
Monitor
Specifically designed for passenger cars, trucks and SUVs.
•
Supports single camera input.
•
High-low voltage and short-circuit protection.
•
Suction cup bracket installation.
•
Automatically displays reverse camera view when reverse gear
is engaged.
Camera
•
CMOS camera in mini size.
•
Three-color proximity guide.
•
Operates over a wide temperature range.
Owner’s Manual
R E A R V I E W C A M E R A S Y S T E M
Monitor Installation
•
Install the monitor on the windshield of the car.
•
Don’t install the monitor in an extremely hot or humid place
(radiator, air duct, etc.) or in a place subject to direct sunlight,
excessive dust, mechanical vibration or shock.
•
The monitor is not waterproof.
Attach the supplied bracket to the glass or flat area and make
sure it’s firmly affixed.
System power ON/OFF
Camera Installation
Adjust the angle of
the monitor and
fasten the back
screw firmly.
First, find the
best position
and angle.
Second, rotate
the bracket and
fix it firmly.
•
Use a silicon waterproof tape to wrap the connector of camera
and extension cable to ensure waterproof.
•
Protect the cable by using conduit or running the cable inside the
vehicle as much as possible.