Carrier Infinity SYSTXCCITC01-A - Manual (Page 48)

42
HEATSOURCE (IF APPLICABLE)
With the Infinity Touch Control, you can select the desired heat source of your
system, if your system is equipped as a HYBRIDHEATR System. Select the
HEATSOURCE icon from the menu screen.
A12155
NOTE: Options available on this screen will correspond to the equipment attached.
S The default is for the system to control the heat source.
S To have only the furnace control, select FURNACE ONLY.
S To have only the heat pump, select HEAT PUMP ONLY.
S
When you have made the appropriate selection, touch SAVE.