MTD 214-031-000 - Manual (Page 15)

Model 031
PARTS LIST FOR MODEL 031 TILLER
REF.
NO.
PART
NO.
COLOR
CODE
DESCRIPTION
NEW
PART
REF.
NO.
PART
NO.
COLOR
CODE DESCRIPTION
NEW
PART
1 720-0204 Grip 33 04922 Tine Blade—R.H.
2 831-0692 Throttle Control Box Ass’y- N 34 04921 Tine Ass’y. Comp.
3 04947 Handle Panel 35 04924 —463 Chain Case Ass’y. Comp.
4 738-0561 Shoulder Nut 36 712-0267 Hex Nut 5/16-18 Thd.*
5 784-0007 Clutch Grip Ass’y- N 37 736-0119 L-Wash. 5/16" I.D.*
6 738-0572 Shoulder Bolt 3/8 x 1.160" 38 736-0217 L-Wash. 3/8" I.D. (Heavy
Lg-
N Duty)
7 710-0262 Carriage Bolt 5/16-18 x 1.5" 39 712-0375 Hex Cent. L-Nut 3/8-16 Thd.
Lg-* 40 710-0600 Hex Wash. Hd. Self-Tap Scr.
8 15093 Cable Support Bracket N 5/16-18 X .50" Lg.
9 710-0599 Hex Wash. Hd. Self-Tap Scr. 41 04762 —463 Support Brkt. Ass’y.
1 / 4-20 X .50" Lg. 42 712-0107 Hex Cent. L-Nut V4-20 Thd.
10 712-0267 Hex Nut 5/16-18 Thd.* 43 714-0104 Internal Cotter Pin
11 736-0119 L-Wash. 5/16" I.D.* 44 09966 Hand Knob
12 712-0256 Hex Jam Nut 5/16-24 Thd. 46 784-0016 Idler Arm Ass’y.
13 736-0119 L-Wash. 5/16" I.D.* 47 754-0216 Belt 3/8" X 29" Lg.
14 725-0157 Cable Tie 48 756-0287 Chain Case Pulley 5V2 x Vz"
15 746-0509 Clutch Control Cable N 49 756-0199 Fl-ldler2"
16 749-0631 Upper Handle—L.H. N 50 736-0119 L-Wash. 5/16" I.D.*
17 749-0630 Upper Handle—R.H. N 51 712-0116 Hex Nut 3/8-24 Thd.*
18 746-0419 Throttle Control Wire 26" 53 04765 —312 Tine Shield
Lg- 54 736-0169 L-Wash. 3/8" I.D.*
19 710-0289 Hex Bolt 55 710-0442 Hex Bolt 5/16-18 X 1.50" Lg.
20 784-0018 Belt Cover Ass’y. N 56 756-0286 Engine Pulley 3/8 V x .75
22 736-0290 FI-Wash. .52" I.D. x 1.00" I.D. X 2" O.D.
O.D. 57 736-0258 FI-Wash. .385" I.D. x 1.00"
23 710-0405 Curved Hd. Bolt 5/16-18 x O.D.
1.75" Lg. 58 710-0152 Hex Bolt 3/8-24 x 1.00" Lg.*
24 711-0653 Clevis Pin 59 712-0267 Hex Nut 5/16-18 Thd.*
25 734-0840 Wheel Ass’y. Comp. 7.0" x 60 736-0289 Shid. Spacer .50" Dia. x .133
1.5 61 784-0033 Throttle Control Bracket N
26 738-0126 Shoulder Bolt 63 731-0511 Trim Strip—4"
27 04764 —463 Depth Bar 64 736-0142 FI-Wash. .281" I.D. x .500"
28 711-0702 Clevis Pin .31" Dia. x 1.50" O.D.
Lg. 65 712-0107 Hex Cent. L-Nut V4-20 Thd.
29 714-0145 Hairpin Cotter 67 — Engine
30 04918 Tine Adapter Ass’y. 68 736-0219 Bell-Wash.
31 710-0599 Hex Wash. Hd. Self-Tap Scr. 69 714-0122 Square Key 3/16 x ¥
4
" Lg.
1 / 4-20 X .50" Lg. 70 736-0242 Bell-Wash.
32 04923 Tine Blade—L.H.
*For faster service obtain standard nuts, bolts and washers locaily. If these Items cannot be obtained
iocaily, order by part number and size as shown on parts list.
(463—Top Fiite Red) When ordering parts if color or finish is important, use the appropriate color code
shown at left. (e.g. Top Fiite Red Finish—04762 (463).)
NOTE
This instruction manuai covers various models
and all specifications shown do not neces­
sarily apply to your model. Specifications sub­
ject to change without notice or obligation.
NOTE: The engine is not under warranty by
the tiller manufacturer... If repairs or service
is needed on the engine, please contact your
nearest authorized engine /t
—7----------------------
service outlet. Check the Find It Fast
“Yellow Pages” of your In The
telephone book under Yellow Pages
“Engines—Gasoline.”
15