beautypg.com

NordicTrack 831.2988 User Manual

Page 17

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

6. SYMPTOM: THE DISPLAYS OF THE CONSOLE DO NOT FUNCTION PROPERLY

a. Remove the screws from the hood. Carefully remove the hood.

Locate the Reed Switch (74) and the Magnet (95) on the left side

of the Pulley (17). Turn the Pulley until the Magnet is aligned with
the Reed Switch.

Make sure that there is a 1/8”gap between

the Magnet and the Reed Switch.

If necessary, loosen the

Screw (90) and move the Reed Switch slightly. Retighten the
Screw. Re-attach the hood, and run the treadmill for a few min­
utes to check for a correct speed reading.

17