Important, Safe operation practices for power vacuums – MTD 249-660-000 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A
IMPORTANT
is suggested that this manual be read in its entirety before attempting to assemble or operate. Keep this manual
tn a safe place for future reference and for ordering replacement parts.
This unit is shipped WITHOUT GASOLINE or OIL. After assembly, see separate engine manual for proper fuel
and engine oil recommendations.
SAFE OPERATION PRACTICES FOR POWER VACUUMS
1.
Read this operating and service instructing manual
carefully. Be thoroughly familiar with the controls
and proper use of the power vacuum.
2.
Never
allow
children
to
operate
this
power
vacuum.
3.
Keep the area of operation clear of all persons,
particularly small children and pets.
4.
No one should operate this unit while intoxicated
_ or while taking medication that impairs the senses
or reactions.
5.
Check fuel before starting engine. Do not fill fuel
tank indoors, when engine is running, or while
engine is hot. Wipe off any spilled fuel before
starting engine.
6.
Do not change engine governor settings.
7.
Do not put hands near rotating parts for any
reason.
8.
If the power vacuum should start to vibrate
abnormally, stop the engine and check immedi
ately
for
the
cause.
Vibration
is
generally
a
warning of trouble.
9.
Before
cleaning,
repairing
or
inspecting,
make
certain all moving parts have come to a complete
stop. Disconnect spark plug wire and keep wire
away
from
plug
to
prevent
accidental
starting.
Also
keep
throttle
control
lever
in
the
stop
position.
10.
If the power vacuum should become blocked with
debris at any point, shut engine off and wait
until
the
impeller
comes
to
a
complete
stop
before
attempting
to
remove
the
obstruction.
Disconnect spark plug wire to prevent accidental
starting.
11.
Check ail bolts for tightness at frequent periods.
12.
Never store this power vacuum with fuel in the
tank. Allow engine to cool before storing in any
enclosure.
13.
Never operate this power vacuum unless air duct
and
vacuum
bag
are
properly
affixed
in
their
place. Large zippered end of bag must be closed
when
operating
to
prevent
objects
from
being
blown out.
13. Keep bag and equipment free of debris when not
in use.
15.
Never empty vacuum bag when engine is running.
16.
Never
change
auxiliary
hose
attachment
when
engine is running.
17.
The manufacturer recommends that the operator
wear safety glasses or some other suitable eye
protection when operating this machine.
18.
Check the vacuum bag frequently for wear and
replace when necessary.