MTD Shredder 770-95-7B - Manual (Page 3)

Models 641A and 645A
PARTS LIST FOR SHREDDERS
.-tEF.
NO.
PART
NO.
CODE DESCRIPTION
REF.
NO.
PART
NO.
CODE DESCRIPTION
1 742-0571 Blade 28 736-0242 Bell-Wash. .345" I.D. x .88"
2 710-0818 Hex Patch Bolt 3/8-24 x 2" Lg. 29 720-0170 Hand Knob
(Gr. 8)t 30 747-0744A Chipper Door Rod
710-1254 Hex Patch Bolt 3/8-24 x 2.25” 31 732-0542 Torsion Spring 1.14" Lg.
(Gr. 8)tt 32 781-0489 Chipper Door
3 714-0114 Sq. Key 1/4 x 2.0" Lg.f 33 781-0475 Chipper Chute Ass’y.
4 736-0217 L-Wash. 3/8" I.D. H.D. 34 736-0170 Spec. L-Wash. 5/16" I.D.
5 736-0247 FI-Wash. .406" I.D. x 1.25" 35 712-3010 Hex Nut 5/16-18 Thd. (Gr. 5)
O.D. Hdn. 36 781-051OA Shredder Frame
6 11459B Flail 37 710-0157 Hex Bolt 5/16-24 x .75" Lg.
7 711-0564 Flail Spacer 38 736-0119 L-Wash. 5/16" I.D.*
8 711-0833A Clevis Pin .496" Dia. 39 710-3008 Hex Bolt 5/16-18 X. 75" Lg.
9 711-0834 Flail Spacer w/. 160" Dia. Hole (Gr. 5)
10 715-0249 Spring Roll Pin 1.12" Lg. 40 710-0442 Hex Bolt 5/16-18 X 1.5" Lg.*
11 736-0192 FI-Wash. .531" I.D. X. 94" O.D. 41 681-0004 Flail Housing Ass’y.-L.H.
12 681-0002 Impeller Ass’y- Comp.f 42 781-0474A Flail Housing Ass’y.-R.H.
681-0030 Impeller Ass’y- Comp.ft 43 735-0639 Spark Plug Boot
(Incl. Ref. 1,6, 7, 8, 9,10, 44 - Engine
11, 12, 13, 14) 47 712-0429 Elastic Lock Nut 5/16-18 Thd.
13 781-0490 Chipper Blade 50 736-0264 FI-Wash. 5/16" I.D.
14 710-1054 Flat Hd. Scr. 5/16-24 x .75" Lg. 52 781-0521 Back-Up Plate
15 712-0411 Hex Top L-Nut 5/16-24 (Gr. 5) 59 726-0214 Push Cap 5/8” Dia. Rod
16 736-0119 L-Wash. 5/16" I.D.* 60 737-0195 Drain Elbow (5 HP B&S)
17 710-0825 Hex Bolt 1/4-20 x 3.75" Lg.* 61 750-0786 Spacer .64" I.D. X .38" Lg.
18 736-0142 FI-Wash. .281" I.D. x .50" O.D. 62 738-0814 Shredder Axle
J^19 750-0793 Chute Hinge Spacer 1.66" Lg. 63 734-1603 Wheel Ass’y. Comp.
"0 711-0835 Clevis Pin .5" Dia. x 4.62” Lg. 79 781-0519 Hopper Support Brkt.
12 712-0291 Hex Ctr. L-Nut 1/4-20 Thd.* 80 781-0515 Front Support Brkt.
23 714-3010 Cotter Pin 81 731-1307 Leaf Hopper
24 781-0457 Shredder Screen 82 781-0589 Hopper Shield
25 714-0149B Internal Cotter Pin 3/8" Dia. — 764-0199A Bag (Not Shown)
26 781-0480 Chute Deflector Ass’y. — 723-0400 Safety Glasses (Not Shown)
27 712-3010 Hex Nut 5/16-18 Thd. (Gr. 5)
tUsed with Keyed Engine Crankshaft.
ttUsed with Tapered Engine Crankshaft.
*For faster service obtain standard nuts, bolts and washers locally.
If these items cannot be obtained locally, order by part number
and size as shown on parts list.
7B — Page 3