Service fiecommendations, Lubrication, Engine – MTD 110-017R000 User Manual
Page 12: Wheel adjusters, Wheels, Service recommendations
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SERVICE FIECOMMENDATIONS
SERVICE RECORD
Fill in Dates as you complete regu
lar service
SCHEDULE
SERVICE DATES
Every
25
Hours
Every
Use
Blade Replaced
v/
Blade Lock Washer Checked/
Replaced (See "BLADE CARE")
Air Cleaner Replaced
v/
Spark Plug Replaced
v/
Lubricate Mower
Cleaning
v/
Grass Catcher (if applicable)
v/
Muffler
- CHECK
LUBRICATION
ENGINE
Your mower has a 2-cycle engine. The engine is II bricaled
by the oil you mix with the gasoline.
WHEEL ADJUSTERS
Use a spray lubricant on the wheel adjuster pivoi bolt.
SPRAY LUBRICANT HERE
WHEELS
DO NOT oil or grease the wheel bearings. Viscous lubri
cants will attract dust and dirt that will shorten the ife of the
self-lubricating wheel bearings. If youfeelthewhoels must
be lubricated, use only a dry, silicon type lubricant spar
ingly.
12