MTD 216-310-000 - Manual (Page 17)

Model 310
PARTS LIST FOR MODEL 310 TILLER
REF.
NO.
PART
NO.
COLOR
CODE
DESCRIPTION
NEW
PART
REF.
NO.
PART
NO.
COLOR
CODE DESCRIPTION
NEW
PART
1 720-0204 Grip 26 738-0318 Shoulder Bolt
2 831-0692 Throttle Control Box 27 736-0921 L-Wash. Vz" I.D.*
3 784-0036 Handle Panel 28 712-0200 Hex Nut Vz-20 Thd.*
4 714-0104 Int. Cotter Pin 29 710-0412 Hex Bolt 1/4-28 X .75" Lg.
5 784-0008 Clutch Grip Ass’y. 30 736-0329 L-Wash. 1 / 4 " I.D.*
6 711-0415 Clevis Pin 31 736-0176 FI-Wash. .25" I.D. x .930"
7 710-0458 Carriage Bolt 5/16-18 x 1.75" O.D.
Lg-*
32 756-0389 Pulley 6.00" O.D.
8 15093 Cable Support Brkt. 33 756-0137 Idler Pulley
9 712-0267 Hex Nut 5/16-18 Thd.* 34 754-0190 “V”-Belt Vz" Pitch X 39" Lg.
10 712-0256 Hex Jam Nut 5/16-24 Thd. 35 750-0472 Spacer
11 736-0119 L-Wash. 5/16" I.D.* 36 726-0106 Cap Speed Nut
12 710-0599 Hex Wash. Hd. Self-Tap Scr. 37 732-0387 Extension Spring
V4-20 X .50" Lg. 38 714-0388 Hi-Pro Key
13 746-0508 Clutch Control Cable 39 736-0119 L-Wash. 5/16" I.D.*
14 725-0157 Cable Tie 40 712-0267 Hex Nut 5/16-18 Thd.*
15 712-0267 Hex Nut 5/16-18 Thd.* 41 710-0118 Hex Bolt 5/16-18 X .75" Lg.*
16 736-0119 L-Wash. 5/16" I.D.* 42 714-0149 Hairpin Cotter
17 04668 Depth Bar 43 749-0633 Handle Support Bracket—
18 710-0118 Hex Bolt 5/16-18 X .75" Lg.* LH.
19 711-0761 Clevis Pin Vz" Dia. x 2.50" 44 749-0626 Handle Bar—R.H.
Lg. 45 749-0632 Handle Support Bracket—
20 784-0005 Tailpiece Ass’y- R.H.
21 711-0755 Clevis Pin 3/8" Dia. x 2.50" 46 749-0627 Handle Bar—L.H.
Lg. 47 746-0503 Throttle Control Cable—35"
22 714-0149 Hairpin Cotter 48 736-0142 FI-Wash. .281" I.D. x .50"
23 06813 Wheel Bracket Ass’y. O.D.
24 736-0253 Belleville Wash. Vz" I.D. 49 710-0779 Self-Tap Scr. #10 x Vz" Lg.
25 734-0968 Wheel Ass’y. 9 x 1.75
*For faster service obtain standard nuts, bolts, and washers locally. If these items cannot be obtained locally,
order by part number and size as shown on parts list.
(463—Top Flite Red) When ordering parts if color or finish is important, use the appropriate color code shown
at left. (e.g. Top Flite Red Finish—04947 (463).)
NOTE: The engine is not under warranty by
the tiller manufacturer...If repairs or ser­
vice is needed on the engine, please contact
your nearest authorized -----------------------——
engine service outlet. Check Find It Fast
the “Yellow Pages” of your In The
telephone book under “En- Y^ow Pages
gines—Gasoline.”
NOTE
This instruction manual covers various models and
all specifications shown do not necessarily apply to
your model. Specifications subject to change
without notice or obligation.
17