beautypg.com

Off-season storage, Optional equipmeisit, Trouble shooting – MTD 692 thru 699 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

OFF-SEASON STORAGE

îre your

ghiy as

storage

The following steps should be taken to prep;

leaf blower for storage.

1.

Clean and lubricate the vacuum thoroi

described in the lubrication instructions.

2.

Refer to engine manual for correct engine

instructions.

3.

If storing in an unventilated or metal

shed, coat metal parts with a light oil or si

prevent rust.

4.

Store in a dry, clean area. Do not store

corrosive materials, such as fertilizer.

storage

icone to

next to

OPTIONAL EQUIPMEIsIT

Hose Attachment Kit Model 290-204-000 is available

as optional equipment. See figure 5.

TROUBLE SHOOTING

PROBLEM

POSSIBLE CAUSE(S)

CORRECTIVE ACTION

Engine fails to start

1. Fuel tank empty, or stale fuel.

2. Spark plug wire disconnected.
3. Faulty sparkplug.

1. Fill tank with clean, fresh fuel.

2. Connect wire to spark plug.

3. Clean, adjust gap or replace.

Loss of power;

operation erratic

1. Spark plug wire loose.

2. Unit running on CHOKE.

3. Blocked fuel lin 3 (if so

equipped) or stile fuel.

4. Water or dirt in fuel system

5. Carburetor out 3f adjustment.

6. Dirty air cleane ■.

1. Connect and tighten spark plug wire.

2. Move choke lever to OFF position.

3. Clean fuel line; fill tank with clean fresh

gasoline.

4. Disconnect fuel line at carburetor to drain

fuel tank. Refill with fresh fuei.

5. Adjust carburetor.t

Engine overheats

1. Carburetor not adjusted

properly,

2. Engine oil level low.

1

. Adjust carburetor.t

2. Fill crankcase with proper oii.

Too much vibration

Loose parts or damaged

crankshaft.

Stop engine immediately and disconnect

spark plug wire. Tighten all bolts and nuts.
Make all necessary repairs. If vibration

continues, have unit serviced by an

authorized service dealer.

Unit does not
discharge

1. Directional discharge clogged.

2. Foreign object edged in air

vane plate asstsmbly.

1. Stop engine immediately and disconnect

spark plug wire. Clean directional discharge.

2. Stop engine immediately and disconnect

spark plug wire. Remove lodged object.

tRefer to the engine manual packed with your unit.

NOTE: For repairs beyond the minor adjustments listed above, please contact your nearest authorized service

dealer.