MTD 24632B User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2.
Periodically check that all nuts, bolts and sci ews
are tight to be sure equipment is in safe
working condition. Where appropriate, chec k all
safety guards and shields to be sure the\ are
in the proper position. Never operate /our
splitter with safety guards, shields or other pro
tective features removed. These safety de\ ices
are for your protection.
3.
Replace all damaged or worn parts suci as
immediately
with
manufacturer
approved
replacement parts.
4.
Do not alter your splitter in any manner such
as attaching a rope or extension to the control
lever or adding to the width or height of the
wedge. Such alterations may cause your
splitter to be unsafe.
5.
Perform all recommended maintenance p.
cedures before you use your splitter.
6.
Never store log splitter outside without a water
proof cover. Rain will cause rust on the inside
of the cylinder.