Poulan 174102 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

PRODUCT SPECiFiCATIONS
GASOLINE CAPACITY:
3 Quarts (2.8L)
Unleaded
Regular
OIL(API-SF/SG/SH):
SAE 30W (Above 32°F/0°C)
(CAPACITY: 20
OZ./0.6L)
S A E
5W-30 (Below
32°F/0°C)
SPARK PLUG :
Champion
(GAP:
.03070.76mm)
RJ19LM
CONGRATULATIONS on your purchase of a new tiller. It
has been designed, engineered and manufactured to give
you the best possible dependability and performance.
Should you experience any problems you cannot easily
remedy, please contact your nearest authorized service
center. We have competent, well-trained technicians and
the proper tools to service or repair this unit.
Please read and retain this manual. The instructions will
enable you to assemble and maintain your tiller properly.
Always observe the “SAFETY RULES”.
CUSTOMER RESPONSIBILITIES
•
Read and observe the safety rules.
•
Follow a regular schedule in maintaining, caring for and
using your tiller.
•
Follow instructions under “Customer Responsibilities”
and “Storage” sections of this Owner’s Manual.
IMPORTANT:
THIS UNIT IS EQUIPPED WITH AN
INTERNAL
COMBUSTION ENGINE AND SHOULD NOT
BE USED ON OR NEAR ANY UNIMPROVED FOREST-
COVERED.
BRUSH-COVERED
OR
GRASS
COVERED
LAND UNLESS THE ENGINE'S EXHAUST SYSTEM IS
EQUIPPED
WITH
A
SPARK
ARRESTER
MEETING
APPLICABLE LOCAL LAWS
( I F
ANY). IF A SPARK
ARRESTER IS USED, IT SHOULD BE MAINTAINED IN
EFFECTIVE WORKING
ORDER
BY
THE
OPERATOR.
INTHE STATE OFCALIFORNIA, A SPARK ARRESTER IS
REQUIRED BY LAW (SECTION 4442 OF THE CALIFORNIA
PUBLIC
RESOURCES
CODE).
OTHER
STATES MAY
HAVE
SIMILAR
LAWS.
FEDERAL
LAWS
APPLY
ON
FEDERAL LANDS. SEE YOUR AUTHORIZED SERVICE
CENTER FOR SPARK ARRESTER.
TABLE OF CONTENTS
SAFETY RULES ........................................................... 2
PRODUCT SPECIFICATIONS......................................... 3
CUSTOMER RESPONSIBILITIES.......... .......... ..... 3,10-12
ASSEMBLY........... ................................................... 4-5
OPERATION........................................................... 6-9
MAINTENANCE SCHEDULE.................................... 10
SERVICE & ADJUSTMENTS ................................ . 12-14
STORAGE....................................... .......... ............ ......... 15
TROUBLESHOOTING ............ .......................................16
REPAIR PARTS-TILLER .......................................... 17-22
WARRANTY ................................... ........... ....................23