MTD 112-020A - Manual (Page 11)

Models 011 and 020
N
PARTS LIST FOR MODELS Oil and 020 ROTARY MOWERS
REF.
NO.
PART
NO.
COLOR
CODE
DESCRIPTION
NEW
PART
REF.
NO.
PART
NO.
COLOR
CODE
DESCRIPTION
NEW
PART
1 14375 —486 Protective Shield Ass’y. 23 732-0253 Torsion Spring
Comp. 24 11130 Adapter Plate
2 711-0718 Mounting Hook Rear Shield 25 726-0106 Push-On Flange Palnut
3 —
Engine 26 712-0107 Hex Cent. L-Nut V 4 - 2 O Thd.
4 710-0158 Hex Scr. 5/16-24 X IV 4 " Lg.* 27 714-0104 Hairpin Cotter
5 711-0555 Pivot Pin 28 749-0386 Lower Handle (Painted)
6 736-0119 L-Wash. 5/16" Scr.* 749-0387 Lower Handle (Chrome)
7 712-0123 Hex Nut 5/16-24 Thd.* 29 726-0188 Cable Tie (020)
8 11402 —486 Deck Ass’y.—Complete 30 710-0606 Hex Scr. 1 / 4 -2 0 X 1.50" Lg.*
9 714-0365 #6 Hi-Pro Key 5/32 x 5/8" Dia. 31 749-0111 Upper Handle (2 Req’d.)
10 10769 Blade Adapter Kit (Painted)
11 742-0121 18 Inch Blade 749-0397 Upper Handle (2 Req’d.)
12 736-0217 L-Wash. 3/8" Scr. H.D. (Chrome)
13 10769 Blade Adapter Kit 33 746-0258 Throttle Control Ass’y.
14 710-0459 Hex Scr. 3/8-24 x 1V 2 " Lg. Comp. (020)
15 710-0117 Hex Scr. 5/16-24 x 1" Lg. 34 710-0136 Hex Bolt 1/4-20 X 1.75" Lg.*
16 736-0119 L-Wash. 5/16" Scr. (020)
17 712-0123 Hex Nut 5/16-24 Thd.* 710-0606 Hex Bolt 1 / 4 -2 0 X 1.50" Lg.*
18 710-0289 Hex Scr. 1 / 4 -2 0 X .50" Lg.* (011)
19 736-0105 Bell-Wash. 3/8" Scr. 35 720-0157 Grip
20 734-0839 Wheel Ass’y.—Complete 36 712-0107 Hex Cent. L-Nut 1 / 4 -20 Thd.
21 738-0213 Axle Bolt 37 712-0287 Hex Nut 1 / 4 -2 0 Thd.*
22 11681 —486 Chute Deflector Ass’y.
*For faster service obtain standard nuts, bolts and washers
locally. If these items cannot be obtained locally, order by
part number and size as shown on parts list.
(486—Star Orange) When ordering parts if color or finish Is
Important, use the appropriate color code shown at left. (e.g.
Star Orange Finish—11402 (486).)
Hub Caps Available
Color Part No.
Red 731-0124
Orange 731-0254
Black 731-0354
Gray 731-0355
NOTE
The use of any accessory on this Rotary Mower
other than those manufactured by the mower
manufacturer is not recommended.
GRASS CATCHER Model 004 is available as optional equipment for the
mowers shown in this manual.
J WARNING {
1. The mower should not be operated without the entire grass catcher
or chute deflector in place.
2. The mower should not be operated without the protective shield on
the rear of the deck in place.
NOTE
Under normal usage bag material is subject to wear and should be
checked periodically. Be sure any replacement bag complies with the
mower manufacturer’s recommendations.
For replacement bags, use only factory authorized replacement bag No.
764-0176.
11