MTD 111-638A - Manual (Page 8)

Gas Line
Hose Clamp (L)
10 .
With a pair of pliers slip the hose clamp (L)
over the end of gas iine (already on engine).
•Place end of gas line over fuel shut-off valve
(on bottom of tank) and secure with hose
clamp (L). See figure 11.
FIGURE 11.
Throttle
Lock Washer
(D) 11. Place the throttle control in position on the
left hand side of the upper handle. Secure
with hex bolt (C), lock washer (D) and hex nut
------(E) provided. See figure 5.
NOTE
Reference to left or right side of
machine is from operator’s position
at the handle facing forward.
12. Secure throttle control cable to handle with
------cable ties (B) provided. See figure 13.
13. Check all nuts and bolts for correct tightness.