Note – MTD 111-638A User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Outer

Hole

(For Storage)

Inner

Hole

(For OperationL

NOTE

There are two (2) holes in the handle

mount brackets. Place hairpin cot

ter in the inner hole for operation.
The outer hole is for storage. See
figure 4.

FIGURE 4.

4. Place the lower struts (Q) in position on strut

mounting brackets and secure with hex bolts

(J), lock washers (G) and lock nuts (H). See

figure 5. Do not tighten at this time, only make
finger tight.

FIGURE 5.