beautypg.com

Poulan HDF550M User Manual

Page 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

PRODUCT SPECIFICATIONS

GASOLINE CAPACITY;

3 Quarts (2.8L)
Unleaded Regular

OIL (API-SF-SJ):
(Capacity; 20 oz./0.6L)

SAE 30 (Above 32“F/0°C)
SAE 5w-30(Below 32°F/0“C)

SPARK PLUG;

(GAP; .03070.76mm)

Champion RJ19LM

CONGRATULATIONS on your purchase of a new tiller. It
has been designed, engineered and manufactured to give
you the best possible dependability and performance.

Should you experience any problems you cannot easily
remedy, please contact your nearest authorized service

center. We have competent, well-trained technicians and
the proper tools to service or repair this unit.

Please read and retain this manual. The instructions will

enable you to assemble and maintain your tiller properly.
Always observe the “SAFETY RULES”.

CUSTOMER RESPONSIBILITIES

Read and observe the safety rules.

Follow a regular schedule in maintaining, caring for

and using your tiller.

® Follow instructions under“Maintenance” and “Storage”

sections of this Owner’s Manual.

IMPORTANT: THIS UNIT IS EQUIPPED WITH AN INTERNAL
COMBUSTION ENGINE AND SHOULD NOT BE USED ON
OR NEAR ANY UNIMPROVED FOREST-COVERED. BRUSH-

COVERED OR GRASS COVERED LAND UNLESS THE
ENGINE'S EXHAUST SYSTEM IS EQUIPPED WITH A SPARK
ARRESTER MEETING APPLICABLE LOCAL LAWS (IF ANY).

IF A SPARK ARRESTER IS USED, IT SHOULD BE MAINTAINED
IN EFFECTIVE WORKING ORDER BY THE OPERATOR.

IN THE STATE OF CALIFORNIA, A SPARK ARRESTER IS
REQUIRED BY LAW (SECTION 4442 OF THE CALIFORNIA
PUBLIC RESOURCES CODE). OTHER STATES MAY HAVE

SIMILAR LAWS. FEDERAL LAWS APPLY ON FEDERAL LANDS,
SEE YOUR AUTHORIZED SERVICE CENTER/DEPARTMENT
FOR SPARK ARRESTER.

TABLE OF CONTENTS

SAFETY RULES........................................................... 2

PRODUCT SPECIFICATIONS.......... .............................. 3
CUSTOMER RESPONSIBILITIES................................ ....3
ASSEMBLY........... ..................................................... 4-5
OPERATION ............................................................... 6-9
MAINTENANCE SCHEDULE........................................ 10

MAINTENANCE ................................................... 10-12
SERVICE & ADJUSTMENTS................................. 13-15
STORAGE.................................................................. 16
TROUBLESHOOTING ............................................. 17
REPAIR PARTS-TILLER..................................... ....18-23
WARRANTY............................................................... 24