Ariens 927 Series - Manual (Page 2)

Safety Alert Symbol And Notations
The following safety notations are used
throughout this manual to call attention to
special information or operating procedures.
Understand the message in each notation and
be alert to unsafe conditions and the possibili­
ty of personal injury.
NOTE; A NOTE points out general reference in­
formation regarding proper operation and
maintenance practices.
IMPORTANT: An IMPORTANT statement in­
dicates specific procedures or information
that is required to prevent damage to the
machine or its attachments.
This safety alert symbol is used to at­
tract your attention! PERSONAL SAFETY
IS INVOLVED! When you see this symbol
- BECOME ALERT - HEED ITS MESSAGE.
CAUTION: A CAUTION Identifies safe
operating practices or indicates unsafe
conditions that could result in personal
injury.
WARNING: A WARNING describes a con­
dition where failure to follow the Instruc­
tions could result in severe personal in­
jury.
DANGER: A DANGER designates a con­
dition where failure to follow Instruc­
tions or heed warning will most likely
result in serious personal injury or
death.
A
A Message to Ariens Customers .. .
Welcome to the world of Ariens equipment. We
are pleased that you have purchased the best
equipment available. The care you give your
Ariens equipment will determine the satisfac­
tion and service life you will obtain from it. Use
this manual and the engine manual, supplied,
as your guide. By observing the instructions
and suggestions in these manuals, your Ariens
equipment will serve you well for many years.
Your Ariens dealer will be happy to supply any
service or advice which may be required to
keep your Ariens equipment operating at peak
efficiency. He stocks genuine Ariens parts and
lubricant; manufactured with the same preci­
sion and skill as the original equipment. His
factory trained staff is kept well informed on
the best methods of servicing Ariens equip­
ment and is ready and able to serve you. If
engine repair or service is required, they can
be obtained from an Ariens dealer or from an
authorized
engine manufacturer’s service
center. If service is required, be prepared to
supply the service person with the Model and
Seriaf Number of the equipment and the
engine, as weliasa full descriptibn of the prob­
lem encountered.
NOTE: The descriptions and specifications
contained in this rhanual were in effect at the
time the manual was approved for printing.
Ariens company reserves the right to discon­
tinue models without notice and without incur­
ring obligation. The equipment described
within this manual may not be Identified as
either standard or optional and the various il­
lustrations may not all be applicable to your
particular unit. If you have questions, always
check with your Ariens dealer.