Husqvarna U03380 Built-in Oven - Manual (Page 5)

Automatic Timer
4. Setting the Oven Controls
When the start and cooking times have been set,
it is then only necessary to set the upper oven
element and thermostat controls in the normal
manner.
1. Setting the Correct Time
Press the knob on the signal timer in and rotate in
either direction until the required time appears.
Automatic Operation of the
Upper Oven
2. Setting the Start Time
The start time is the actual time of day you wish
the oven to switch on. In other words the time
when the food shall start to cook.
Press in the knob marked start and turn in either
direction to the required start time.
bL''
» r * l @ r 8^ Ol
1
3. Setting the Cooking Time
By means of the knob marked stop, you set the
period of time the oven will remain on, i.e. the
amount of time you wish the cooking to take.
Turn the knob in a clockwise direction to any
period up to a maximum of 6 hours. The cooking
time is dependent upon the type of food, cooking
utensil and amount of food being cooked. Under
the heading GENERAL HINTS you will find some
guiding examples.
5. When Automatic Cooking
is Finished
The timer will automatically turn the top oven off.
Return the oven controls to 0 and the stop control
to MAN. Until the stop control is returned to this
position you will be unable to use the oven on
Manual control.
6. Short Period Signal Timer
The signal timer can be used to time any
operation such as boiling eggs, baking cakes or to
remind you of an appointment etc. for any
duration up to 60 minutes. To set the timer turn
the knob in a clockwise direction to the required
setting. When the set time has elapsed a bell will
sound intermittently until the control is returned
to the OFF position.
If the upper oven fails to operate ensure that the
auto-timer is correctly set.
The upper oven will only function manually
when the left hand knob of the auto-timer is set to
MAN, and the centre knob is in the extended
position and is indicating the time as shown on
the digital clock. If all functions on your appliance
fail to operate ensure that the main switch is
turned ON before contacting the Service
Department.