Husqvarna U03380 Built-in Oven - Manual (Page 4)

Upper Oven Element
Control
With this control you can
choose the elements you
wish to use. The symbols
on the control refer to
the location of the
elements and their power
in watts.
Thermostat Control, Upper
Oven
With this control knob
you choose the required
temperature in the upper
oven. The setting is
infinitely variable
between 50°C-300°C.
Indicator Lamps
START3500
o 15CX)
o 650
o 2000
Rapid heating of the oven all
elements are switched on.
•Jf IMPORTANT: The rapid heating
facility should not be used
for more than 8 minutes after
this time set the control to:-
Upper and lower heat
elements only.
Lower element only.
Grill element only.
■Jf (This facility should not be
used when using the
automatic control.)
The red light is an
indicator lamp which will
illuminate when one of the
ovens is switched on.
The first yellow light is
for the upper oven. The
second yellow light is for
the lower oven. These
lights illuminate when the
relevant oven is turned
on and will extinguish
when the oven has reached
the set temperature.
Thermostat Control,
Lower Oven
With this control the
elements and the
temperature are selected.
Both the top and bottom
element are switched on
together, they cannot be
selected individually.
The setting is infinitely
variable between
50°C-300°C.
Temperature Conversion
0“C 0°F
50 122
100 212
150 302
200 392
250 482
300 572
Grill Spit
Two support holders are provided for the spit and
these locate into the front and rear of the roasting
pan. Impale the food to be grilled on the skewers
and place the roasting pan with the supports in
the oven on the lowest slide rail. Place the spit on
the supports and insert the grill spit into the
socket at the rear of the oven. Ensure that the
steering track immediately in front of the spit
handle locates in the front support. Remove the
handle and close the door. Set the upper oven
thermostat at 250 - 300 and the oven knob
to O 2000.
The grill motor will operate whenever a grill
element position is selected on the oven element
control.