SINGER W9951 - Manual (Page 28)

30
ATTACHMENT FOOT
In order to attach the binder, edgestitcher and the
hemmers, it is necessary to remove the presser foot and
replace it with the attachment foot. Fig. 38.
Mount binder, edgestitcher or hemmers sliding the
attachment to the left as far as possible and tighten
screw.
The mounting slot enables you to sew as close to
or as far away from the edge as desired. Just move the
attachment to the correct position before tightening the
mounting screw.
Fig. 38
THE EDGESTITCHES
The. edgestitcher is used in mak­
ing lace insertions, edgings and pip­
ing. The slots serve as guides. To
sew lace edging to fabric, place the
material you want on top in slot. Fig.
39, and the other piece in slot 4.
To trim with a wide piping, place
the fabric in slot 4, and the fold of Fig. 39
aior o, lor a narrow piping, place the
edge ot the piping to the right in slot 3.
Slot 5 may be used as a guide in stitching a french seam.
2 and the folded
- \
. \
e ^
e ^
- H
1^ y
m ^
I?
* ^
k
k*
O'
C '