Roll hemming – SINGER W1505 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
19. ROLL HEMMING
Set machine as shown.
*
Option accessory.
With straight stitch
Make
0.3cmi1/8")
double
fold
for about 5cm(2"j at very edge
of material, and crease it.
Sew twice at 0.6cm(1/4"j from
edge.
Draw out work and leave about
1 5cm(6") of thread.
Place material under presser foot
and guide edge into scroll, pulling
six thread ends towards back.
Sew a few stitches as shown.
Keep guiding material holding
raw edge about 0.6cm(1/4") in
front of foot.
This manual is related to the following products: