SINGER WK-100 - Manual (Page 17)

You can form the pattern us in Fig. 40 by slowly moving the zigzag regulating
lever as the machine is running until the zigzag indicator is on * 4, then quickly
release the zigzag regulating lever and again slowly move the zigzag regulating
lever to * 4. Repeat as often as desired.
In order to ftirni the pattern as in Fig. 41, first move the zigzag regulating lever
#• 4 . and while running the machine slowly release the zigzag regulating lever
until the zigzag indicator is on "0”. When the zigzag indicator reaches "0”, quickly
move the zigzag regulating lever to * 4. Repeat as often as desired.
In order to make the pattern as formed in Fig. 42, with the zigzag indicator
on ■■()". sew a straight stitch for the length desired; then while the machine is still
running, quickly move the zigzag regulating lever to * 4. Sew the number of stitches
desired and then quickly release the zigzag regulating lever. Repeat as often as desired.
0 12 3 4 0 12 3 4
4 0 4 0 4
Fig, 4 2
NOTE : The above patterns are just a few of the numerous patterns that you
will be able to make with your machine. By varying the speed with which you
move the zigzag regulating lever and releasing the zigzag regulating lever at the
same time varying the stitch length and; the number of stitches made, you will be
able to create hundreds of different patterns.
CAUTION : When the machine is not sewing, do not move the zigzag regulating
lever unless the needle is raised out of the material. When making patterns, for
best results, the machine should be sewing at a moderate rate of speed.
14