Embroidery, Costura para bordar – SINGER W1955 User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Page 40
5
English
EMBROIDERY
Set machine as shown.
Remove foot, and holder
screw.
To avoid lower thread from
being pulled up, reduce upper
thread tension.
For good embroidery, it is
important to use the correct
needles and thread.
Use embroidery thread for
upper thread and a thinner
thread of same kind and color
for lower thread.
Trace your design on material
and center it in embroidery
hoop. Make sure material is
taut.
Español
COSTURA PARA BORDAR
Preparar la máquina como se
indica.
Quitar ei pie prénsatela y el
soporte con el tornillo.
Para evitar que se jale ei hilo
inferior reducir la tensión del
hilo superior.
Para hacer un buen bordado
es importante usar las agujas
e hilos apropiados.
Usar hilo de seda en la parte
superior, y en la parte inferior
(carrete) uno más delgado del
mismo color.
Trazar ei diseño sobre el mate
rial y centrarlo en el bastidor.
Debe asegurarse que el
material esté estirado.
Needle
Thread
No. 9
120 -100
No. 11
100-80
No. 14
60-50
Aguja
Hilo
No. 9
120-100
No. 11
100-80
No. 14
60-50