To darn do the following – SINGER W1415 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EMSROiDERY
Remove prssser
foot
Pa ttern selector . . . . . . . ............. MlCp'5
Stitch length dial.................. .......... 0
Place the fabric with embrodidery hoop. Set the stitch length
dial at'' 0 Lower the presser foot lifter. Hold the embroidery
hoop firmly with you hand.
While sewing the desired pattern, move the emoroidery hoop
slowly and do not allow your fingers to get near the needle.
'Set the needle thread tension a little looser so that the bobbin
thread is not pulled through to the right side of fabric.
'It is recommended to mark the required embroidery pattern
on the right side of the fabric with a pencil or tailor's chalk.
TO DARN DO THE FOLLOWING
1. Turn the stitch length dial to zero.
2. Turn the zig zag to the desired width.
3.
Release the pressure
on the pressure foot.
- 2 6 -