Carimg for your machine – SINGER 3102 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CARIMG FOR YOUR MACHINE
CAi/nON: Before deaning^ your machirn ah
ways remove the power-line plug from the
eiectricai outlet
How often you will need to clean your
machine will depend on how often you use it.
When lint and fluff accumulate, clean and oil
the areas shown.
For best results, apply SINGER* oil at points
indicated. SINGER oil is specially prepared
and does not contain harmful deposits that
Top Cover
can Interfere with the smooth action of pre
cision parts.
Periodically, clean and lubricate all moving
connections in top and bottom of machine to
ensure freedom of movement and to protect
metal parts from excessive wear. Put a drop
of oil at each point where parts move
against each other. To determine oiling
points, turn hand wheel slowly by hand
while covers are removed, and observe
movement of parts.
Clean
СНтфщ the
ШиШ
OAifTION: Before changiiig the tight bold
disconnect power-line plug from your electri
cal outlet
Use a 15 watt maximum light bulb.
Remavlng Sulb
Press bulb into socket and at the same time
turn buib over in direction shown to unlock
bulb pin. Do not attempt to unscrew bulb.
Press new bulb Into socket, with bulb pin
entering slot of socket, and -turn it over In
direction shown to lock bulb in position.