SINGER 214 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
19
1, First
finish
the raw edge. Do
this by turning, it up on fine
fabrics and overcasting it on
medium to heavyweight ones.
Then turn the hem up the
required depth and press,
SETTiMGS
Zigzag width ~ 3 to 4
Stitch length -
4
Speed
range -
LOW
2, Now f o l d the fabric as
iilustratec.
3. With the wrong side up, place
the fabric under the foot.
Lower the presser foot. Stitch
so that the needle just pierces
the fold when the needle
swings to the left.
4, When completed, the stitch
ing is almost invisible on the
right side of the fabric.
This manual is related to the following products: