Adjusting pressure and feeding of fabric, Adjusting pressure and feed – SINGER W173 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Fig. 17

Fig. 18 i

Fig. 15

Fig. 19

ADJUSTING PRESSURE AND FEEDING OF FABRIC

GENERAL SEWING

Usually for normal sewing the pressure bar cap or darner release,

22, Fig. 19, is at Its lowest position and the drop feed knob is

turned to “HI” position. Fig. 20.

SEWING THIN OR LIGHT WEIGHT FABRICS

When lighter pressure is required to sew satisfactorily on thin silk

or filmy material, the pressure cap should be about halfway down.

Release all the way by pressing the snap lock, (A, Fig. 21) and

then press cap (B) down again to halfway spot. Lower the feed

slightly by turning the black dot on the knob to ”LO” position.

Fig. 20