Washing, Presoaking – Maytag LAT8714 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

to the proper cycle and wash time.
Washing:
The HEAVY cycle is designed to wash very soiled
loads, the NORMAL cycle is for average soiled
loads and the LIGHT cycle should be selected for
slightly soiled loads.
For REGULAR FABRIC loads, turn the control knob
to 12 minutes for a HEAVY cycle; to 8 minutes for
a NORAAAL cycle; and to 5 minutes for a LIGHT
cycle.
The SUPERWASH cycle (not on all models)
provides additional wash time for regular fabric
loads. It will add approximately 6-8 minutes of
agitation to the cycle. To select, turn the control
knob to SUPERWASH.
For PERMANENT PRESS loads, turn the control
knob to 10 minutes for a HEAVY cycle; to 7
minutes for a NORMAL cycle; and to 5 minutes
for a LIGHT cycle. Due to the extra cool down
rinse which minimizes wrinkling, this cycle can
also be used for non-permanent press items when
additional rinsing is needed.
For DEUCATES, washable woolens or "hand-
washable" items, turn the control knob to 8
minutes for a NORMAL cycle; and to
5
minutes
for a LIGHT cycle.
The QUICK CYCLE reduces the cycle time by using
a 6 minute wash and a shorter first spin and
rinse. Total cycle time is approximately 16
minutes plus fill times. To select, turn the control
to assure proper agitaHon and spinning
for each load type. REGULAR FABRIC
cycles and the QUICK CYCLE will provide
a fast wash/spin speed. PERA4ANENT
PRESS will have a fast wash/spin speed
along with a cool-down rinse. DEUCATE
final spin speed.
Presoaking:
The AUTOMATIC PRESOAK cycle (not on all
models) moves from the presoak into the
HEAVY' regular fabrics cycle automatically.
Since the presoak and the wash are done in one
tub of water, it saves water and energy. A hot
water presoak is recommended for heavily soiled
items. A warm or cold water presoak is
recommended for protein stains (blood, grass,
etc.).
'
To use the AUTOMATIC PRESOAK cycle turn the
control knob to PRESOAK. The washer will soak
for approximately 10 minutes (this includes
periods of agitation) then move directly into 12
minutes of wash without draining and refilling.
When using the Presoak cycle, use up to 50%
more than the usual amount of detergent or use a
presoak product such as Axion or Biz* in
addition to the regular amount of detergent. If
you choose to use bleach, it can also be added
at this time.
Brand names are the trademarks of the respective manufacturers.
... more
PAGE 5