Oven racks, Half rack accessory, Ovgn opgfâtion (continued) oven racks – Maytag MER4530 User Manual

Page 12: Rack positions

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

OvGn OpGfâtion (continued)

Oven Racks

Rack Positions

CAUTION: Do not attempt to change the rack posi

tion when the oven is hot.

Your oven has two racks. They are designed with a lock- stop

edge.

To remove:

Pull rack

straight out until it stops
at the lock-stop posi
tion; lift up on the front
of the rack and pull out.

To replace:

Place rack

on the rack support in
the oven; tilt the front
end up slightly; slide rack back until it clears the lock—stop
position; lower front and slide back into the oven.

Do not cover an entire rack with aluminum foil or placefoil
on the oven bottom. Baking results will be affected and
damage may occur to the oven bottom.

Half Rack Accessory

A half rack, to increase oven ca
pacity, is available as an acces
sory. It fits in the left, upper por
tion of the oven and provides space
for a vegetable dish when a large

roaster is on the lower rack. Con
tact your Maytag dealer for the
“HALFRACK” Accessory Kit.

RACK 5 (highest position);

Used for toasting bread or broiling thin non-fatty foods.

RACK 4:

Used for most broiling.

RACK3:

Used for most baked goods on a cookie sheet or jelly roll

pan, layer cakes, fruit pies, or frozen convenience foods.

RACK 2:

Used for roasting small cuts of meat, casseroles, baking
loaves of bread, bundt cakes or custard pies.

RACKl:

Used for roasting large cuts of meat and poultry, frozen
pies, dessert souffles or angel food cake.

Multiple Rack Cooking:

Two rack:

Use rack positions 2 and

and

1 1